| |
Space and Budget
Planning |
Choosing the Right
Design |
Installing Your
Playground |
Installing Your Playground
|
 |
| Step 1 |
Read your step-by-step, fully illustrated plans carefully before beginning any work.
- Be careful not to deviate from the plans or change the design in any way.
|
|
| Step 2 |
Measure and cut all of your lumber.
- Refer to the detailed cutting guides provided with your unit.
|
|
| Step 3 |
Assemble your playground.
- Simply follow the detailed instructions to perform the final assembly of your playground.
|
|
| Step 4 |
Make sure you have a safe play environment.
- Please follow our assembly instructions carefully. They are designed to meet or exceed ASTM safety standards.
Make sure you have the minimum use zone as specified in the assembly plan.
- To ensure complete safety, make sure you have provided safety surfacing as recommended by the U.S. Consumer Products Safety Commission (found in your assembly plans). This surfacing material comes in a variety of forms (such as sand or wood chips) and is purchased separately.
|
|
NOTE:
General list of tools you will need:
- Hand tools:
Socket wrench/sockets, hammer, phillips screwdriver, tape measure,
pliers, 5/16" x 8" drill bit, 1-1/8" spade bit, shovel, square
Power tools:
Electric or cordless drill, circular saw
- Other materials you will need:
Safety glasses, water seal, landscape fabric, surfacing material,
landscape timbers
|
Professional Installation
- Many of our retailers are now providing professional installation of all Swing-N-Slide playgrounds.
   |
See your retailer for details |
|
|
|
