Installing Your Swing Set

Check out "Build A Child's Play Structure" using a Swing-n-Slide kit on Ron Hazelton.com!

Step 1

Read your step-by-step, fully illustrated plans carefully before beginning any work.

• Be careful not to deviate from the plans or change the design in any way.

Click here to view a sample page from a plan

Step 2

Measure and cut all of your lumber.

• Refer to the detailed cutting guides provided with your unit.

Click here to view a sample cutting guide

Step 3

Assemble your swing set.

• Simply follow the detailed instructions to perform the final assembly of your swing set.

Note: Please follow our assembly instructions carefully. They are designed to meet or exceed ASTM safety standards.

Step 4

Make sure you have a safe play environment.

• Make sure you have the minimum use zone as specified in the assembly plan.

• To ensure complete safety, make sure you have provided safety surfacing as recommended by the U.S. Consumer Products Safety Commission (found in your assembly plans). This surfacing material comes in a variety of forms (such as sand or wood chips) and is purchased separately.

See Swing Set Safety for proper materials and recommended depths.

General list of tools you will need:

• Hand tools:
Socket wrench/sockets, hammer, phillips screwdriver, tape measure,
pliers, 5/16" x 8" drill bit, 1-1/8" spade bit, shovel, square

• Power tools:
Electric or cordless drill, circular saw

• Other materials you will need:
Safety glasses, water seal, landscape fabric, surfacing material,
landscape timbers

Professional Installation

• Many of our retailers are now providing professional installation of all Swing-N-Slide swing sets.

See your retailer for details